國家級人體生物資料庫整合平台共同資料模式實作指引(NBCT Common Data Model IG)
1.1.0 - Release1.1.0 Taiwan, Province of China flag

This page is part of the 國家級人體生物資料庫整合平台共同資料模式實作指引(NBCT Common Data Model IG) (v1.1.0: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Extension: CRLFOthRTnf - Detailed Descriptions

Active as of 2024-09-01

Definitions for the CRLF-OthRTnf extension.

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition

用於表示癌症登記長表資料檔(CRLF)之其他放射治療臨床標靶體積治療次數


Optional Extension Element - found in all resources.

Short其他放射劑量臨床標靶體積治療次數Optional Extensions Element
Control0..*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 4. Extension.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    Fixed Valuehttps://www.ghd.tw/cdm-fhir/StructureDefinition/CRLF-OthRTnf
    6. Extension.value[x]
    Definition

    Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

    Short其他放射治療臨床標靶體積治療次數。[CRLF.ort_nf]Value of extension
    Control10..1
    TypeChoice of: CodeableConcept, Quantity, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Extension.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
    • type @ $this
    • 8. Extension.value[x]:valueQuantity
      Slice NamevalueQuantity
      Definition

      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

      ShortValue of extension
      Control0..1
      TypeQuantity, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. Extension.value[x]:valueQuantity.value
      Definition

      The value of the measured amount. The value includes an implicit precision in the presentation of the value.

      ShortNumerical value (with implicit precision)
      Comments

      The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

      Control10..1
      Typedecimal
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Precision is handled implicitly in almost all cases of measurement.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. Extension.value[x]:valueQuantity.comparator
      Definition

      How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

      Short< | <= | >= | > - how to understand the value
      Control0..1
      BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1
      (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)

      How the Quantity should be understood and represented.

      Typecode
      Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

      Meaning if MissingIf there is no comparator, then there is no modification of the value
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      14. Extension.value[x]:valueQuantity.unit
      Definition

      A human-readable form of the unit.

      ShortUnit representation
      Control10..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. Extension.value[x]:valueQuantity.system
      Definition

      The identification of the system that provides the coded form of the unit.

      ShortSystem that defines coded unit form
      Control0..1
      This element is affected by the following invariants: qty-3
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Need to know the system that defines the coded form of the unit.

      Pattern Valuehttp://unitsofmeasure.org
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. Extension.value[x]:valueQuantity.code
      Definition

      A computer processable form of the unit in some unit representation system.

      ShortCoded form of the unit
      Comments

      The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

      Control0..1
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

      Pattern ValuecentiGray
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Extension.value[x]:valueCodeableConcept
      Slice NamevalueCodeableConcept
      Definition

      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

      ShortValue of extension
      Control0..1
      BindingThe codes SHALL be taken from For codes, see 其他放射治療臨床標靶體積治療次數值集
      (required to https://www.ghd.tw/cdm-fhir/ValueSet/CRLF-ORT-NF-vs)

      其他放射治療臨床標靶體積治療次數;應填入所綁定值集中的其中一個代碼。

      TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Extension.value[x]:valueCodeableConcept.coding
      Definition

      A reference to a code defined by a terminology system.

      ShortCode defined by a terminology system
      Comments

      Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

      Control10..*
      TypeCoding
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Allows for alternative encodings within a code system, and translations to other code systems.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. Extension.value[x]:valueCodeableConcept.coding.system
      Definition

      The identification of the code system that defines the meaning of the symbol in the code.

      ShortIdentity of the terminology system
      Comments

      The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Need to be unambiguous about the source of the definition of the symbol.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. Extension.value[x]:valueCodeableConcept.coding.code
      Definition

      A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

      ShortSymbol in syntax defined by the system
      Control10..1
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Need to refer to a particular code in the system.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. Extension.value[x]:valueCodeableConcept.coding.display
      Definition

      A representation of the meaning of the code in the system, following the rules of the system.

      ShortRepresentation defined by the system
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. Extension.value[x]:valueCodeableConcept.text
      Definition

      A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

      ShortPlain text representation of the concept
      Comments

      Very often the text is the same as a displayName of one of the codings.

      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

      Guidance on how to interpret the contents of this table can be foundhere

      0. Extension
      Definition

      用於表示癌症登記長表資料檔(CRLF)之其他放射治療臨床標靶體積治療次數

      Short其他放射劑量臨床標靶體積治療次數
      2. Extension.extension
      Control0..0
      4. Extension.url
      Fixed Valuehttps://www.ghd.tw/cdm-fhir/StructureDefinition/CRLF-OthRTnf
      6. Extension.value[x]
      Short其他放射治療臨床標靶體積治療次數。[CRLF.ort_nf]
      Control1..?
      TypeChoice of: CodeableConcept, Quantity, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Must Supporttrue
      Must Support TypesNo must-support rules about the choice of types/profiles
      SlicingThis element introduces a set of slices on Extension.value[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • type @ $this
      • 8. Extension.value[x]:valueQuantity
        Slice NamevalueQuantity
        Control0..1
        TypeQuantity
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Must Supporttrue
        10. Extension.value[x]:valueQuantity.value
        Control1..?
        Must Supporttrue
        12. Extension.value[x]:valueQuantity.unit
        Control1..?
        Must Supporttrue
        14. Extension.value[x]:valueQuantity.system
        Must Supporttrue
        Pattern Valuehttp://unitsofmeasure.org
        16. Extension.value[x]:valueQuantity.code
        Must Supporttrue
        Pattern ValuecentiGray
        18. Extension.value[x]:valueCodeableConcept
        Slice NamevalueCodeableConcept
        Control0..1
        BindingThe codes SHALL be taken from 其他放射治療臨床標靶體積治療次數值集
        (required to https://www.ghd.tw/cdm-fhir/ValueSet/CRLF-ORT-NF-vs)

        其他放射治療臨床標靶體積治療次數;應填入所綁定值集中的其中一個代碼。

        TypeCodeableConcept
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Must Supporttrue
        20. Extension.value[x]:valueCodeableConcept.coding
        Control1..?
        Must Supporttrue
        22. Extension.value[x]:valueCodeableConcept.coding.system
        Control1..?
        Must Supporttrue
        24. Extension.value[x]:valueCodeableConcept.coding.code
        Control1..?
        Must Supporttrue
        26. Extension.value[x]:valueCodeableConcept.coding.display
        Must Supporttrue
        28. Extension.value[x]:valueCodeableConcept.text
        Must Supporttrue

        Guidance on how to interpret the contents of this table can be foundhere

        0. Extension
        Definition

        用於表示癌症登記長表資料檔(CRLF)之其他放射治療臨床標靶體積治療次數

        Short其他放射劑量臨床標靶體積治療次數
        Control0..*
        This element is affected by the following invariants: ele-1
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        2. Extension.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        4. Extension.extension
        Definition

        An Extension

        ShortExtension
        Control0..0
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 6. Extension.url
          Definition

          Source of the definition for the extension code - a logical name or a URL.

          Shortidentifies the meaning of the extension
          Comments

          The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

          Control1..1
          Typeuri
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          Fixed Valuehttps://www.ghd.tw/cdm-fhir/StructureDefinition/CRLF-OthRTnf
          8. Extension.value[x]
          Definition

          Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

          Short其他放射治療臨床標靶體積治療次數。[CRLF.ort_nf]
          Control1..1
          TypeChoice of: CodeableConcept, Quantity
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Must Supporttrue
          Must Support TypesNo must-support rules about the choice of types/profiles
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on Extension.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
          • type @ $this
          • 10. Extension.value[x]:valueQuantity
            Slice NamevalueQuantity
            Definition

            Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

            ShortValue of extension
            Control0..1
            TypeQuantity
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            12. Extension.value[x]:valueQuantity.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            14. Extension.value[x]:valueQuantity.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Extension.value[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 16. Extension.value[x]:valueQuantity.value
              Definition

              The value of the measured amount. The value includes an implicit precision in the presentation of the value.

              ShortNumerical value (with implicit precision)
              Comments

              The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

              Control1..1
              Typedecimal
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summarytrue
              Requirements

              Precision is handled implicitly in almost all cases of measurement.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              18. Extension.value[x]:valueQuantity.comparator
              Definition

              How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

              Short< | <= | >= | > - how to understand the value
              Control0..1
              BindingThe codes SHALL be taken from QuantityComparator
              (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)

              How the Quantity should be understood and represented.

              Typecode
              Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

              Meaning if MissingIf there is no comparator, then there is no modification of the value
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              20. Extension.value[x]:valueQuantity.unit
              Definition

              A human-readable form of the unit.

              ShortUnit representation
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summarytrue
              Requirements

              There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              22. Extension.value[x]:valueQuantity.system
              Definition

              The identification of the system that provides the coded form of the unit.

              ShortSystem that defines coded unit form
              Control0..1
              This element is affected by the following invariants: qty-3
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summarytrue
              Requirements

              Need to know the system that defines the coded form of the unit.

              Pattern Valuehttp://unitsofmeasure.org
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              24. Extension.value[x]:valueQuantity.code
              Definition

              A computer processable form of the unit in some unit representation system.

              ShortCoded form of the unit
              Comments

              The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

              Control0..1
              Typecode
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summarytrue
              Requirements

              Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

              Pattern ValuecentiGray
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              26. Extension.value[x]:valueCodeableConcept
              Slice NamevalueCodeableConcept
              Definition

              Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

              ShortValue of extension
              Control0..1
              BindingThe codes SHALL be taken from 其他放射治療臨床標靶體積治療次數值集
              (required to https://www.ghd.tw/cdm-fhir/ValueSet/CRLF-ORT-NF-vs)

              其他放射治療臨床標靶體積治療次數;應填入所綁定值集中的其中一個代碼。

              TypeCodeableConcept
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              28. Extension.value[x]:valueCodeableConcept.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              30. Extension.value[x]:valueCodeableConcept.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Extension.value[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 32. Extension.value[x]:valueCodeableConcept.coding
                Definition

                A reference to a code defined by a terminology system.

                ShortCode defined by a terminology system
                Comments

                Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                Control1..*
                TypeCoding
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Requirements

                Allows for alternative encodings within a code system, and translations to other code systems.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                34. Extension.value[x]:valueCodeableConcept.coding.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                36. Extension.value[x]:valueCodeableConcept.coding.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on Extension.value[x].coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 38. Extension.value[x]:valueCodeableConcept.coding.system
                  Definition

                  The identification of the code system that defines the meaning of the symbol in the code.

                  ShortIdentity of the terminology system
                  Comments

                  The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                  Control1..1
                  Typeuri
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summarytrue
                  Requirements

                  Need to be unambiguous about the source of the definition of the symbol.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  40. Extension.value[x]:valueCodeableConcept.coding.version
                  Definition

                  The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                  ShortVersion of the system - if relevant
                  Comments

                  Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                  NoteThis is a business version Id, not a resource version Id (see discussion)
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  42. Extension.value[x]:valueCodeableConcept.coding.code
                  Definition

                  A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                  ShortSymbol in syntax defined by the system
                  Control1..1
                  Typecode
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summarytrue
                  Requirements

                  Need to refer to a particular code in the system.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  44. Extension.value[x]:valueCodeableConcept.coding.display
                  Definition

                  A representation of the meaning of the code in the system, following the rules of the system.

                  ShortRepresentation defined by the system
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summarytrue
                  Requirements

                  Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  46. Extension.value[x]:valueCodeableConcept.coding.userSelected
                  Definition

                  Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                  ShortIf this coding was chosen directly by the user
                  Comments

                  Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                  Control0..1
                  Typeboolean
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  48. Extension.value[x]:valueCodeableConcept.text
                  Definition

                  A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                  ShortPlain text representation of the concept
                  Comments

                  Very often the text is the same as a displayName of one of the codings.

                  Control0..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summarytrue
                  Requirements

                  The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))